QUALITY IN HARMONY WITH AESTHETICS AND PERFORMANCE – The period of SELENIT 75 Begins

System

• All system profiles of the Selenit Series have a width of 75 millimeters.
• Together with the detailed profiles that are integrated in main profiles, they are able bring a solution to each architectural and technical detail.
• Window molding profiles are suitable for usage with triple-glass windows up to 44 millimeters.
• The system is suitable for usage with 13-axis espagnolettes.
• The resistance values of the system enable its usage on high-rise structures.
• The lamination type that comes in 21 different colors and textures provides you with choices for both indoor and outdoor use.

EXPERIENCE, TECHNOLOGY AND DESIGN UNITE IN SELENIT 75

Wind Load Resistance

• During design stage of Selenit 75, it was taken care for the moments of inertia belonging to the support sheets to be used within the system and the “wind load resistance” depending on these was at the highest level.
• The series offers new solutions that can be utilized safely to provide coverage for high-rise structures and wide spaces.
• The grillage profiles in the system can easily meet the ideal resistance values required for coverage of wide spaces in respect to architectural design.
• The high endurance values of the Selenit system passed the 3.000 Pa (245 km/h) safety test successfully and was categorized in class C3 in regard to wind load resistance.

FOR THOSE WHO SEEK A DIFFERENT SOLUTION FOR NEW GENERATION STRUCTURES

Water and Air Impermeability

• In order to minimize air and water permeability, Selenit Series was designed with a triple gasket system (optional).
• Prevention of air passage from outdoors to indoors, which is necessary for energy saving, was improved with a middle gasket in addition to inner and outer gaskets.
• The profiles were designed as to discharge rainwater to outdoors by formation of inclines and drainage channels on them.
• The system did not leak any water inside and proved its high quality while under tests carried out with 600 Pa (110 km/h) wind load and 4 liters of rainwater per minute.

HEAT AND SOUND INSULATION IS NO LONGER A PROBLEM

Heat Insulation

• In accordance with the standard TS EN ISO 10077-2, the Selenit System achieved the values Uf:1,02 W/m2 °K -Uw: 0,94 W/m2 °K according to the results of the test with Ug: 0,6 W/m2 °K glass of 1,23 m x1,43 m dimensions.
• The main profiles of the Selenit Series have 6 wide cells. This enables them to minimize thermal conductivity coefficient.
• Owing to the 3rd middle gasket (optional), the insulation performance was increased to the highest level possible in a PVC window system.
• The profile designs of the Selenit Series were made as for the thermal conductivity coefficient values to be at minimum levels.

Sound Insulation

• The sound insulation properties of the Selenit Series provide the noiseless environment that is necessary for life quality in the best way.
• It is possible to achieve sound insulation up to 43 dB with Selenit window systems.
• The Selenit Series ensures normal noise levels even in environments such as airports, railroads, etc. where sound levels are very high.
• The glasses with acoustic properties which will be used with the system makes it possible to reach sound insulation levels as high as 43 dB.

The Selenit Series, designed at the highest level of aesthetics, performance and durability standards, offers a new window for modern structures. The series was developed for those who were looking for a solution that captures the zeitgeist under the changing life culture and living space concepts. The Selenit Series offers a complete system with its 75-millimeter profile width, 6-cell design and 3rd gasket option, which enable it to achieve the highest levels of performance.

A NEW ERA FOR PRESTIGIOUS PROJECTS
A NEW ERA IN WINDOW TECHNOLOGY

Our understanding of living spaces and our life are changing rapidly. We strive to use time more efficiently and take care of making choices which will keep us from experiencing problems at our living spaces for years. Construction technology continues to shape itself on higher comfort and functionality. REDONIT 85 is a new series which takes PVC window and profile standards to a new level and meets all the requirements in durability, aesthetics, thermal and acoustic insulation criteria by exceeding all standards for prestigious projects. It was designed for more comfort via its superior heat and sound insulation features and is now presented to those who search for a new dimension in aesthetics. Through its Class A wall thickness, 7 chambered designs and three sealed system, the series is capable of providing maximum performance in thermal and acoustic insulation parameters under the harshest climate conditions. With 21 different color and pattern options, the Redonit Series is a system which goes beyond the standards for elite projects. The series also allows usage of different colors for the exterior and interior of buildings, in order to meet the decorative expectations. The Redonit system provides excellent acoustic insulation against the outdoor noise on which we become gradually more sensitive and ensures extra impermeability via its three sealed system. Redonit, a perfect window system for those who wish to enhance their quality of life, is now at your service.  

Aesthetics

REDONIT 85 is a window system which suits the decorative needs of all modern projects through its range of 21 lamination colors. The architectural style of the building facades and interior environment allows the implementation of different laminate colors at indoor and outdoor environments. While the wood patterned colors capture the beauty of nature, different grey tones such as Aluminium Brush Effects and Anthracite, can provide you a consistent view of the aluminum facade.

System Properties

• The Redonit system has a profile width of 85 mm.
• All profiles in the system have Class A wall thickness.
• It is designed to have 7 chambers.
• All profiles of the system have three seals.
• Since the seals are implemented by being integrated onto the profiles, the third seal becomes optional and may not be used unless desired.
• It is possible to use glass units of up to 44 mm.
• The Redonit system can be used under the harshest conditions and in the widest openings by means of its profile width, number of chambers and impermeability system.
• It is compatible with 13 mm axis espagnolettes.
• It was designed to conveniently provide solutions for all architectural technicalities through its detailed and auxiliary profiles.

Wind Load Resistance

• The Redonit system was designed according to the safety of 3.000 Pa (245 km/h) wind load resistance and the strength of 600 Pa (110 km/h) water impermeability and has successfully passed these tests.
• During the design process of the Redonit system, the maximum wind load values to which the buildings can be exposed were taken into the consideration; the structure of the reinforcement steel and their locations inside the profiles were designed in the most effective way.
• System, whose detailed and grillage profiles provide solutions to meet the architectural needs, easily ensures the closure of the wide openings and necessary resistance values.
• By its Class A Wall thickness and reinforcement steels, the system can meet the inertia values required against high wind loads.

Water and Air Impermeability

• Thanks to its water drainage channels and sets designed to discharge the rainwater faster and in an easier way, it provides high resistance to water even at high wind loads.
• The system did not leak any water inside and proved its high quality under tests carried out with 600 Pa (110 km/h) wind load and 4 liters of rainwater per minute.
• Owing 3^rd seal prevents indoor water leakage completely.

Heat Insulation

• The Redonit system was designed to achieve the lowest thermal conductivity coefficient possible in window systems by means of superior features such as its 85 mm wide profiles, 7 chambers, and capacity for glass units up to 44 mm, suitable chamber widths and convenient profile heights.
• The custom-designed frame, sash and third middle seal used in the system provides thermal insulation at maximum level and ensures the Redonit Series to be an investment which pays for itself by means of energy saving during the summer and winter.
• In accordance with the TS EN ISO 10077-2 standard, the window system with the dimensions of 1,23 m x 1,43 m has achieved the values of Ug : 0,6 W/m2K, Uw : 0,93 W/m2K and Uf : 1,07 W/m2K.

Sound Insulation

• Redonit 85 Series provides acoustic insulation with values up to 44 dB. Thus, the system makes it possible to attain an indoor sound level that accommodates a quality life, even in the noisiest environments.
• The custom-design seal system of the Redonit 85 Series enables the series to achieve maximum values in acoustic insulation.
• The sound insulation level to be acquired via acoustic glasses that can be used with the system isolates the noise of outdoors from indoors in the most efficient way.

A NEW ERA IN WINDOW AESTHETICS
THE ARTISTIC INTERPRETATION OF A WINDOW

If you are a person who can dream about the future without getting lost in the hassle of daily life; if your taste and understanding in aesthetics is indispensable for the decisions you make for comfort and pleasure; if you are interested in what is “different and special” instead of the standard one; if you expect exclusive solutions to bring distinction to your life; the Opal 70 Series was designed for you.  It unites those looking for the artistic solutions with the art in window design. 

The Opal 70 Series implements art into windows with rounded features and aesthetically elegant structure. Owing its authentic rounded design is much more different than the conventional oval series of the modern era. The Opal 70 Series is up for becoming the new choice of architects searching for a distinctive approach at aesthetics.

Aesthetics

The Opal 70 window system provides aesthetically exclusive look to windows, especially at the connection point of the mullion and frame profile. The series enhances the elegance of windows and satisfies your expectations through 21 different lamination color and pattern options.

System

• The system has a profile width of 70 mm.
• It is designed to have 5 chambers.
• In the system it is possible to use glass units of up to 32 mm.
• The Opal 70 Series meet all requirements in wind load resistance, water and air impermeability parameters by means of its profile width, number of chambers and impermeability system.
• With oval glazing bead profiles it brings the smooth features of the exterior into the interior as well.
• The system is compatible with 13 axis espagnolettes.
• It was designed to conveniently provide solutions for all architectural technicalities through its detailed and auxiliary profiles.

Wind Load Resistance

• The Opal 70 system successfully passed safety test of 3.000 Pa (245 km/h) wind load resistance.
• While designing Opal 70 system’s reinforcement steel and their locations inside the profiles, the maximum wind load values to which the buildings can be exposed were taken into the consideration.
• The system easily meets the resistance value requirements for covering the wide openings via its detailed and grillage profiles.

Air and Water Impermeability

• Thanks to the water drainage channels and sets designed to discharge the rainwater faster and in an easier way, the high resistance to water even at high wind loads was provided.
• Under tests carried out with 600 Pa (110 km/h) wind load and 4 liters of rainwater per minute, the system did not leak any water inside and proved its high quality.

Heat Insulation

• By means of the chamber numbers, chamber widths and profile heights developed in consideration of the profile width, the Opal 70 Series is able to meet all the requirements regarding thermal conductivity coefficient.
• In accordance with the TS EN ISO 10077-2 standard, the window system with the dimensions of 1,23 m x 1,43 m has achieved the values of Ug : 0,8 W/m2K, Uw : 1,15 W/m2K and Uf : 1,1 W/m2K.

Sound Insulation

• The Opal 70 Series provides sound insulation with values up to 40 dB. Therefore, it is possible to create a sound environment at a high quality life level even at the loudest places.
• The sound insulation level to be acquired via acoustic glasses that can be used with the system has maximum efficiency.

• Window glazing in thickness from 3 mm through 40 mm can be applied.
• It is not affected from sunlight and external effects and not subject to deformation; and completely sealed thanks to specially designed black EPDM seal.
• Inclination by 15º and 35ºon the profile surface facilitates water discharge.
• No water leak after rain.
• Thanks to its specially designed water channel, outward inclination by 9º and water collection reservoir, it ensures discharge of water and moisture easily.
• The difference in height between the outer wall and inner wall in the water discharge conduits prevents ingress of the discharged rainwater by the wind effect. Furthermore, these channels which are not in contact with the reinforcement steel part ensure ventilation.
• As hinge screw is directly driven in to the hinge reinforcement steel, there is no risk of sash sacking.
• Glazing bead profiles are inclined by 15º and, therefore, make pressure on the glazing surface to make it more stabilized and no dust accumulates on it.
• Tabs under the profile ensure easy mounting and removal, good balance during mounting and reduction of heat transfer, operating in harmony with all detailed profiles as well.
• As the profiles are reinforced with specially designed, double-groove and galvanized single type of reinforcement sheets, their resistance against external loads is very high.
• It provides ample solutions for window panes in different thickness with 4 glazing bead profiles, namely, single, 20 mm double, 24 mm double and 32 mm triple glazing bead profiles. And it is also possible to apply all other mountings.
• As all main profiles have at least 5 chambers, they provide excellent heat insulation.

A detailed profile, which is used for PVC door and window systems, is a type of PVC profile that is commonly utilized in the product series of Fıratpen, Winhouse, Gedizpen brands, which are PVC door window system brands of Fırat.

Detailed profiles are not indispensable components of PVC door and window systems. They are provided by PVC window suppliers in order to resolve potential issues in the implementation of PVC doors and windows or to meet the demands of the end consumer. In other words, they can be used for structuring the architectural appearance of the window or improving its performance, as well as bringing a solution to any present application difficulties or problems.

The fact that detailed profiles can be utilized in all series of all Fırat brands enables for these to be implemented in even more areas of use. Additionally, since the detailed profiles of other manufacturers can be different in size or form, the product variety of the sector is improved as well.

A distinctive advantage detailed profiles have is that their area of utilization is not limited to PVC door and window systems. They can also be implemented in different sectors such as construction, agriculture (greenhousing), pharmaceutical and chemical industries. The corrosion resistance, long life and superior insulation values of detailed profiles facilitates their usage in various areas.

Similar to main profiles, auxiliary profiles are also PVC profiles that are specific to the series they are used in within PVC door and window systems. The potential of using these outside of their own series is minimal. Auxiliary profiles are PVC profiles that are indispensable components in the production of PVC joinery.

PVC door and window systems cannot be manufactured without main PVC profiles. However, even though it is very rare, PVC door window systems can be manufactured with the lack of some auxiliary profiles. Auxiliary profiles cannot be utilized in common by different series or brands. However, some joint areas of use may exist coincidentally. A window manufacturer chooses auxiliary profiles as per the requirements of its techniques and the demands of the end user and cannot replace the chosen auxiliary profile with another one. Therefore, auxiliary profiles are used like main profiles in PVC door and window systems.

Auxiliary profiles, which are chosen in accordance with the production style, technical specifications and assembly method of the PVC doors and windows, must be brought to the production area during the manufacturing process. Since these cannot generally be replaced with other PVC profiles, their absence may cause the production of PVC doors and windows to cease.

In other words, these profiles are essential during production and are usually bound to fail for usage in another area or for another function. Auxiliary profiles are indispensable PVC profiles of which the implementation in PVC door and window systems must adapt to the main profiles.

Covered by use of hot-melt lamination technique in accordance with RAL standards, Firatpen PVC Window and Door Systems having natural wood pattern provide ideal solutions for your original architectural and special decorational expectations with their wide choice of coating, aesthetic look and functionality.

To satisfy our customer’s high expectations regarding their projects and decoration alternatives, we have added eye-catching collection of new colors to our existing album. Golden Oak, Oak, Mahagony, Cedar, Walnut, Grey and Anthracite laminated paterns now are strengthened with our new spectrum of colors: Anteak, White, Aluminium Brush Effect, Winchester, Cream White, Silver Brush Effect, Steel Blue, Dark Green, Ash, Dark Oak, Silver Grey, Macoré, Trompet, Metallic Grey and Eiche Rustical. Our intention is to bring the pleasure of colorfullness into your projects and your beloved homes.